High qualityAluminum cut in the massComplete modelFor 7/8″ 22mm handlebarsExclusive Remmotorcycle product

Opt for a complete pair ofhandle switchesfor your bike.

Are your motorcycle controls outdated? Are they too big? The buttons don’t work properly anymore?

Discover our complete pair of switches. They are made of CNC 6061 aluminum, cut from the ground.

The left motorcycle switch is composed of:

• A button for the horn
• A button to turn on the high beam
• A switch 3 positions for the indicators.

And on the rear part, a button that can be used for the headlights.

The motorcycle commodo of right-hand side is composed of:

• A start button
• A button that can be used for the lights or warnings
• Akill switch

And on the rear part, a button that can be used for the speedometer for example.

It is a high quality product.

Themotorcycle handle switchesare installed on a 7/8″ (22 mm) handlebar.

The wires are installed in a braided sheath.

You can install them on both sides, left and right.

The installation of the switches is simple. Just replace the original switches with the new ones and plug the wires in place of the original ones and you’re done.

You don’t have to wire anything, the wires are already installed.

The product is available in black or grey with black or silver buttons.

The buttons are screwed on the aluminum frame. They can be replaced if you wish.

These universalhandle switchescan be installed on all motorcycles and ideally on your Royal Enfield, your Honda, your Triumph, or any other brand with 7/8″ (22mm) handlebars.

These switches are now available in PLUG AND PLAY version for ROYAL ENFIELD

Exemples installation :

Video:

Test and Installation on Royal Enfield Interceptor by Bavure Garage:

Wires correspondence:

Left switch:

• Yellow: back button
• Grey: Horn
• Green: Full headlight
• White: Left and right
• Black: negative turn signal

Right hand convenience:

• Yellow: rear button
• Red: kill switch
• Green: left button
• Grey: start button

Resistors: On certain models of motorcycle equipped with hazard warning lights, you may need to install resistors to ensure that the number of flashes works properly.

Wire mapping for Royal Enfield Interceptor:

Voir cette publication sur Instagram

Une publication partage par Bavure Garage (@bavure.garage)

Note:

Sold by 2.

Currently available in 7-10 days.